16. Protect the battery pack from impacts, and don't open it.
17. Never discharge the battery pack completely and recharge occasionally if not used for a
prolonged period.
18. When the battery pack is not used for long periods you should store it at room
temperature (18°C to 24°C) with a battery charge level of 30
– 50 % of its power. If the
battery pack is stored for a very long period it must be charged up once every year to
prevent it from discharging.
19. Remove the battery pack from the power tool wh
en it’s not in use for a longer period of
time.
20.
Protect the battery pack against vibration and shocks. Do not use after it’s been dropped
or exposed to shocks.
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual
risk factors. The following hazards may arise in connection with the tool’s
construction and design:
1.
Health defects resulting from vibration emission if the power tool is being used over
longer period of time or not adequately managed and properly maintained.
2.
Injuries and damage to property to due to broken accessories that are suddenly dashed.
Warning!
This power tool produces an electromagnetic field during operation. This field may
under some circumstances interfere with active or passive medical implants. To reduce the
risk of serious or fatal injury, we recommend persons with medical implants to consult their
physician and the medical implant manufacturer before operating this power tool.
Important safety precautions for battery packs:
1.
Carefully read all instructions and (1) the battery charger, (2) the battery, and (3) the
warning labels on the products using the battery before using the battery pack.
2.
Do not disassemble the battery pack.
3.
If the running time of the machine becomes too short, please stop using it
immediately. Otherwise, it may cause overheating, fire or even explosion.
4.
If the electrolyte enters your eye, rinse it with clean water and seek medical attention
immediately. Otherwise, it may lead to impaired vision.
5.
Do not short-circuit the battery pack:
1）
Do not allow any conductive material to touch the terminal;
2）
Avoid placing the battery pack in the same container as other metal objects such
as nails and COINS;
3）
Do not leave the battery pack in water or in the rain. A short circuit in the
battery will generate a large current, causing overheating and possibly causing
a fire or even a breakdown.
6.
Do not place the tool and battery pack where the temperature may reach or exceed
50
℃
(122 F).
7.
Do not burn the battery pack even if it is badly damaged or completely worn out. It may
explode in fire.
8.
Please be careful not to hit the battery or drop it.
9.
Do not use damaged batteries.
Please keep this instruction manual.
