Chart of parts
The parts marked with * are not included and needs to buy separately.
The parts marked with ** are not included.
The below drawing shows how to connect the cable from the lamp to the power source.
Maintenance & Replacement
There is no maintenance required for this lamp
– it is designed to be used only once, meaning
that replacement is necessary if it becomes defective (repairing is impossible). Before any
handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp
from the bracket and disassemble the cable. Ensure the new lamp is of the same model and
characteristics as the one being replaced.
Start-up
• The lamp should only operate underwater while secured to the vertical walls of the pool.
Never
switch on the lamp if it is not underwater.
• In case of colored lamps, 16 pre-programmed effects and combinations may be selected using
the on/off switch of your pool lights. Just switch off and switch on within 2 seconds.
• If the light is powered off for more than 20 seconds, it will keep the latest program when it is
turned on again.
Содержание HT029C-P-T
Страница 2: ......
