Страница 1: ...ebsite http www hentech cn en IMPORTANT This manual includes essential information on the safety measures to be implemented for installation and start up Therefore the installer as well as the user must read these instructions before beginning installation and start up Technical Specification Standard input voltage 12V AC DC Range 12 18VAC or DC Standard input watt RGB White 18W 23W 30W 33W 21W 26...
Страница 2: ......
Страница 3: ...here is NO voltage supplied to the lamp To replace unfasten the lamp from the bracket and disassemble the cable Ensure the new lamp is of the same model and characteristics as the one being replaced Start up The lamp should only operate underwater while secured to the vertical walls of the pool Never switch on the lamp if it is not underwater In case of colored lamps 16 pre programmed effects and ...
Страница 4: ... standards must be observed WIRING IN BUILDINGS SPECIAL WIRING SWIMMING POOLS Replacement must be performed with the lamp disconnected from the electric power system Do not handle any electrical components with wet feet Warranty The manufacturer warrants this resin filled LED underwater lights against defects in materials and workmanship for a period of three years from the date of purchase This w...
