HENSEL-VISIT GmbH & Co. KG
25
3.5.5 Modeling light control
Select the flash function with the function key, then
simultaneously press both function keys „<>“ and then the function
key
„>”: now the display shows „LI ---“ and you can switch the
modelling light function of the addressed flash units between
„On“, „Off“ and „Prop“ by pressing the value key „˄˅“. The trans-
mission is indicated by a rotating symbol. You can also reach the
modeling light function directly after flash metering by pressing both function keys twice.
4 Service and repairs
No special maintenance is required, if the Strobe Master is handled correctly.
Keep the outside surface clean. Use a slightly dampened cloth for cleaning. Do not use cleansers,
abrasives or solvents.
Should the meter nevertheless not work to your satisfaction, please get in contact with our local
distributor (if you live outside Germany) or send the Strobe Master to:
Hensel-Visit GmbH & Co. KG
Robert-Bunsen-Straße 3
D-97076 Würzburg
Phone: +49 (0)931/27881-0
E-Mail: [email protected]
www.hensel.de
