HENSEL-VISIT GmbH & Co. KG
13
2.3 Pre-selection of f-stop series and time series
It is possible to pre-select the f-stop settings and the exposure
times in 1/1, 1/2 or 1/3 values. First press the function ISO (see
below) and simultaneously both function keys “<>”, then use the
value key to switch between
„dEv 0.3“ (1/3), „dEv 0.5“ (1/2) and
„dEv 1.0“ (1/1).
3 The individual functions
3.1.1 Setting the film speed
Select ISO with the function buttons
Adjust the required ISO value with the value buttons
(display left: DlN value, right: ISO value)
Once the film speed has been set, it is transferred to the memory
of the Strobe Master and maintained when the meter is set to any operation function. It remains
visible on the top right-hand side in the digital display.
Any change of the film speed directly influences the stored paired aperture and shutter speed values.
The selected film speed is retained in the memory until it is changed in the described manner.
