Hensel Porty Premium Plus, Руководство пользователя

Страница: 37 / 50

User manual // Porty Premium Plus
HENSEL-VISIT International GmbH
37
Automatic overload circuit
Large series of subsequent flashes may trigger the automatic
overload circuit. After a break of cooling down, the power
pack is ready again for operation. The Ready indicator
18
flashes up.
Lamp connections
EH Pro Mini 1200 P Head (Code 3604)
EH Pro Mini 1200 P Speed Head (Code 3607)
Both flash heads are specially designed for operation with the
Porty power pack. The modeling lamp of both flash heads is
50W/12V Halogen.
They both have flash head cables with round sockets; the
cable of the EH Pro Mini 1200 P Heads is screwable.
Therefore, screw the flash head cable to the flash socket of
the flash head first and tighten it safely using the cap screw.
To remove the plug, complete unscrew the cap screw and
pull the plug upwards.
Ring flash RF 3000P/PM-XS (Code No. 3410)
Special version only for operation with Porty power pack. For
synchronization, the ring flash can be directly connected with
the camera using the 3.5 mm synchronization socket. The
ring flash is not equipped with a modeling lamp.
Additional HENSEL flash heads
HENSEL flash heads fitted with a 20-way-plug do also work
with Porty power pack. For connection to the power pack a
special adapter cable (Code No. 578) can be ordered. In this
case the modeling light is not available.
Accessories
For the connected flash heads the wide HENSEL accessory
range of series EH/CONTRA (adapter Ø 10 cm) is available.
Third party manufacturers
Even though similar lamp sockets and plugs are used by
other manufacturers as well, lamps and flash heads from
these manufacturers may
not be connected to the Porty
power pack.
18