Hensel-Visit COPY ONE, Руководство пользователя

Страница: 6 / 24

User manual Copy One
6 HENSEL-VISIT GmbH & Co. KG
Protecting Equipment from Moisture and Splash Water
Flash units need to be protected from high humidity, moisture, wetness
and splash water. Therefore, please do not place containers with liquids
on the flash units.
Take care that neither the flash unit nor the flash or mains cable is lying
on a wet floor.
Connecting Accessories
Do not connect accessories from other manufacturers, even if these look
similar or identical.
Not in Use During Dust Development
Equipment that is not in use when doing work that results in strong dust
development needs to be covered with suitable dust protection.
Safety Hints Pertaining to the Electrical System
Contact with the flash generator’s capacitor voltage is life threatening.
Therefore, opening the housing and repairs may only be done by
authorized customer service personnel:

Never open the device – high voltage, risk of death!
 The unit may only be connected to a power supply with working
equipment grounding conductor.

Use only lamp plugs with flawless contacts. Burned down or
corroded plug contacts may cause a fire.

Defective plugs may lead to defective plug sockets.

To prevent damages, avoid leading cables across floors. If this
cannot be avoided, make sure that the cable is not damaged by
vehicles, ladders, etc. Damaged cables and housings need to be
replaced immediately by authorized customer service personnel.
Explosion of Flash Tube
The flash tube is filled with xenon gas. There is negative pressure inside
the flash tube. Plasma develops during flashing due to electrical energy