Henrac Tech Ef168, Руководство по эксплуатации

Страница: 7 / 11

4
Press the button on the transmitter and to change the
control range. According to the comparison table above, such as:
level 10. and then take the collar receiver to right location as the
right control range. Press ON/OFF button of collar receiver to
power it on and move the collar to the boundary wire. If the
warning tone of “bi-bi” and vibration are issued or bi-bi” and
shock are issued, and then place the LED test light on the collar
contact probes, the LED should light on in a few seconds (It’s
means the shock function is good). If you move the receiver collar
away from the boundary, the receiver will stop “bi-bi” and
vibration or shock.
This product has three levels of function adjustable: the first
level is only vibration function, the second level is weak static
shock function, the third level is strong static shock function.
(There is a warning beeper prompt for each level.)
5.Verify the function of fence system
Set the transmitter signal power level:
UP
DOWN