Henny Penny Wendy's MPC-21L, Руководство оператора

Страница: 11 / 12

9 Sept. 2013
DISPLAY CAUSE PANEL BOARD CORRECTION
“
E-4” Control board overheating
Turn POWER switch to OFF then back ON; if
display still shows “E-4”, the unit is overheating or
louvers are clogged
“E-6”
Faulty temperature temperature
probe
Check probe for loose connection or probe faulty
“E-41” Memory scrambled
Press and hold the UP and DOWN buttons and
turn unit on. After SP shows on display, press
SET button twice. Then press and hold the UP or
DOWN button until In-SYS shows in display; if
“E-41” persists, replace the control board
“Hi”
Unit overheating; faulty relay or
control board
Have relay or control board replaced
4-1.
ERROR CODES
SECTION 4: TROubLESHOOTING