Henny Penny FSDE 610.610, Инструкция по эксплуатации

Страница: 34 / 68

Service menu - appliance test
34 Service instructions
INFORMATION
In case of changes to the wiring, label or deposit note in the unit.
Overview
Assigning the backup relay
Select the defective relay by means of the roller.
Touch the "OK" field.
Changes saved.
Canceling the selection Touch the "Back" field.
Relay overview
Relay Connect
or
No. Description Instruction
K1 X10 2 Main contactor Q1 Reconnect the line from X10.2 to X12.5 and to
assign a reserve relay to it.
K1 X11 1 POS A Reconnect the line from X11.1 to X12.5 and to
assign a reserve relay to it.
K2 X11 2 POS B Reconnect the line from X11.2 to X12.5 and to
assign a reserve relay to it.
K4 X12 3 Magnetic valve for water vapor
elimination K12 Reconnect the line from X12.3 to X12.5 and to
assign a reserve relay to it.
K5 X12 4 Siphon pump G24 Reconnect the line from X12.4 to X12.5 and to
assign a reserve relay to it.
K6 X12 5 Backup relay K6 Reconnect the line from X12.5 to X12.5 and to
assign a reserve relay to it.
K8 X17 1 Solenoid fresh air M8 Reconnect the line from X17.1 to X12.5 and to
assign a reserve relay to it.
K17 X12 1 Circulating pump G16 Reconnect the line from X12.1 to X12.5 and to
assign a reserve relay to it.
Dismantling and re-
programming
After changing the control board the original state is restored. Thus,
the backup relay is not used unnecessarily.
Establish the original condition of the wiring (from X12. 5 to Xx).
Calling up the "Backup relay" in the Service menu.
Select "OFF" using the roller.
The backup relay is deactivated.
Touch the "OK" field.
Changes saved.
FM06-078A