Henny Penny EPC-2, Руководство оператора

Страница: 8 / 24

Model EPC-2, EPC-3 & EPC-4
2-2 707
5. Unpack and install shelves.
a. Hook the shelf brackets in the slots in the back, interior of unit.
b. Pull the cover off the receptacles on the right side of the shelves.
Figure 1.
c. Line up the prongs on the plug with the holes in the receptacle,
and firmly push the plugs into the receptacle. Figure 1.
The plugs must fit firmly into the receptacles for the shelf
heaters to operate.
6. Remove the bottom inserts and pull cardboard packing from around
elements in bottom of unit.
To avoid fire, remove the 3 corrugated shipping supports
located beneath these inserts, all visible packing material, tape,
and the unpacking instructions, prior to operation.
7. Peel off any protective covering from the exterior of the cabinet.
Take care when moving the cabinet to prevent personal
injury.
8. Once the shelves are installed, and the packing material removed,
the unit is ready for operation.
2-2. UNPACKING
(Continued)
Figure 1
2-3. LOCATION The unit should be placed in an area where the unit can be loaded and
unloaded easily. For proper operation, the cabinet must be level.
If the Henny Penny heated express cabinet does not have casters, level
the unit and run a bead of silicone rubber (silicone or equivalent sealant
must be a NSF listed material) around the perimeter of the unit, sealing
it to the floor.