manualshive.com logo in svg

Henny Penny 500, Техническое руководство

Поделиться
Скачать
Henny Penny 500 Скачать руководство пользователя страница 61

            

 

 

 

 

 

 

Model 

500/561/600

2-17.  PRESSURE

REGULATION/
EXHAUST (Continued)

Pressure Gauge Cleaning Steps

1.  Remove gauge and check inside the pipe 

fi

 ttings from dead-

 

weight body.  Make certain 

fi

 ttings are clean and open.

2.  Clean and reinstall the gauge.

Condensation Box Assembly

The deadweight valve and solenoid exhausts are directed into a

  condensation box, located in the rear of the fryer.  Should
  this box become clogged, water would spew from the top of the
  box.  The box can be cleaned by running a wire or long brush
  from the top of the box, through the hole in bottom of the box,
  or the bottom of the box can be removed to clean.

When cleaning the frypot, pour a cup of cleaning solution 
into the large exhaust hose at the top of the exhaust tank 
(see 

fi

 gure at left).  This helps prevent the box from getting 

clogged.

1.  Loosen 

fi

 tting at the bottom of the box.

2.  Using Phillips head screwdriver, remove 4 screws securing  

 

the bottom of the box and pull bottom from assembly.

3.  Clean outlet hole in box bottom and check condensation 

 

tube for clogs, and clean, if necessary.

4.  Reinstall box bottom and condensation line.  

5.  Seal box bottom with silicone sealant and unit is now ready 

 for 

operation.

Condensation Box Bottom Removal

Condensation Box Bottom 

Step 2

Condensation Box Fitting 

Step 1

1202 

 

 

 

 

 

 

 

 

      

     

     

        

     2-41

Содержание 500













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды