manualshive.com logo in svg

Henny Penny 500, Техническое руководство

Поделиться
Скачать
Henny Penny 500 Скачать руководство пользователя страница 157

            

 

 

 

 

 

 

Model 

500/561/600

 (SAMPLE)

This section lists and illustrates the replaceable parts of Henny 
Penny Model 500, 561 and 600 pressure fryers built after Novem-
ber 6, 2000.  If your unit was built prior to that date, some 

differences may exist.  If you have any doubts, please contact 
your distributor.  As with all contacts to your distributor, include 
the model number and serial number from the nameplate on your 
unit. 

Use only genuine Henny Penny parts in your fryer.  Using a part 
of lesser quality or substitute design may result in fryer damage or 

personal injury. 

This section covers model variations due to options, different 
applications (gas or electric), and to cover the latest design  
improvements.  When you order replacement parts, be sure to 
check for model variations as stated in the 

fi

 gure title and in the 

DESCRIPTION column of the parts list.

To 

fi

 nd the items you want to order, proceed as follows:

1.  Use the index of illustrations, paragraph 3-11, to 

fi

 nd the  

 

page number of the proper illustration.

2.  Referring to the illustration, 

fi

 nd the part desired and its  

 item 

number.

3-2.  GENUINE PARTS

3-3.  MODEL VARIATIONS

504 

 

 

 

 

 

 

 

      

     

     

        

     

       3-1

SECTION 3. PARTS INFORMATION

3-1.  INTRODUCTION

3-4.  HOW TO FIND PARTS

Содержание 500













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды