Henning GmbH & Co. KG
page 18
19/02/2019
Your goal is to adjust the ropes in such a way, that all bars change their colour from red to
green and settle within the two thin horizontal lines, which define the tolerance, which you
have set in the menu “configuration”. Bars above of the central line represent tense ropes
whereas bars below the centre line represent loose ropes.
As so
on as you leave the wizzard by pressing the „save“ key, the data is stored in the unit
and you will be able to allocate a project-ID (see also 6.E.3). Data can be processed utilizing
the PC-software and reports can be issued.
Save
Save
Cancel
Cancel
Save
Cancel
