background image

4

Please complete the form below as it will be of great assistance in the 

highly unlikely event that there is a problem with the stove or a warranty 

claim needs to be made. Please contact the person who installed the stove

or the dealer where it was purchased from if there is a problem.

Dealer Appliance Was Purchased From

Essential Information - 

MUST BE COMPLETED

Installation Engineer

Commissioning Checks (to be completed and signed)

Name:

Address

:

Phone:

Date installed:

Model Description:

Serial number:

Company name:

Address

:

Phone

:

Stove correctly flued according to building regulations:

Flue swept and integrity of flue verified:

Smoke test completed on installed stove:

Spillage test completed:

Use of appliance and operation of controls explained to end-user:

Check that specified clearance to combustibles has been adhered to:

Instruction manual handed to end-user:

HETAS Approved (Please tick relevant box):

Yes

No

If Yes, please include certificate of compliance.

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Signature

:

Print name:

Stove Commissioning Checklist

Содержание Yale 8 MSF


























Отзывы: