TwinSide TS™
Thermal Printer Family
HENGSTLER
Part No. D 691 023A
Mod. No. 4 120912 LEV
page 32 of 34
®
12. Technical Specifications
12.1. TS-56 P/N 0691001 Specifications
Technology:
Direct Thermal
Print Speed:
24 VDC: 90 mm/sec max.
Duty Cycle:
24 VDC: Fifteen (15) 150 mm long printouts per minute max.
for a total of 50 printouts followed by a one minute pause at
+25°C.
Resolution:
203 dpi (8 dots/mm)
Minimum Printout Length:
30 mm without presenter or chute.
45 mm without presenter but with chute
97 mm with presenter when “Pre-Print Header” is disabled
111 mm with presenter when “Pre-Print Header” is enabled
Maximum Printout Length:
350 mm, but depends upon loop allowance in design and
upon paper stiffness. Please see “Loop Presenter” section.
Printhead Life
Abrasion (based
100 km of paper
on 12.5% print density)
Electrical
:
100 million dot pulses
Graphic Driver:
Windows
®
2000/XP/7 (32 and 64 bit), Linux
Bar Codes:
Internally Generated:
UPC-A, UPC-E, EAN-13, EAN-8, Code 39,
Interleaved 2 of 5, Code 128, Codabar, PDF 417, QR code
Externally Generated:
Any, generated by Windows
®
standard GDI file by host
Paper Width:
54 mm +0/-1 mm (fixed)
Printable Width:
56 mm
Paper Weight:
100 to 120 g/m²
Paper Capacity:
6 inch (150 mm) roll diameter
10 inch (250 mm) roll diameter with properly designed
spring buffer
Interface Types:
RS-232
Interface cable length 3 meters max.
9,600 to 115,200 baud
Operating Voltage:
24 VDC ± 5%
Current Draw:
In standby
<150 mA (without PPE sensors)
While printing
With Hengstler paper, at 21°C ambient temperature, with a
print speed of 90 mm/sec, voltage of 24.0 VDC, and print
density (coverage) of 12.5%: approximately
2.4 A avg.
With Hengstler paper, at 21°C ambient temperature, with a
print speed of 90 mm/sec, voltage of 24.0 VDC, and print
density (coverage) of 25%: approximately
4.1 A avg.
With Hengstler paper, at 21°C ambient temperature, with a
print speed of 90 mm/sec, voltage of 24.0 VDC, and print
density (coverage) of 50%: approximately
6.6 A avg.
