manualshive.com logo in svg

Hengst OPM II, Руководство по эксплуатации

Поделиться
Скачать
Hengst OPM II Скачать руководство пользователя страница 37

37/44 

Maintenance and repair

Hengst Filtration GmbH

, OPM II, RE 51460-B/04.2021

10  Maintenance and repair

10.1 Cleaning and care

NOTICE

Improper cleaning!

Early wear, malfunctions! Risk of damage! Damage to property!

 

▶

Cover all openings with the appropriate protective threads in order to 
prevent cleaning agents from penetrating the system.

 

▶

Check that all seals and electric plug-in connections are firmly fitted to 
prevent the penetration of cleaning agents.

 

▶

Do not use aggressive cleaning agents for the external cleaning. Clean 
the product using a suitable cleaning liquid.

 

▶

Use exclusively residue-free industrial wipes to clean the online par-
ticle monitor.

 

▶

Do not use a high-pressure washer.

 

▶

Do not use compressed air for the cleaning at functional interfaces like 
e.g. in sealing areas.

 

▶

Use clean oil or solvents such as isopropanol to clean the cell.

10.2 Maintenance

If used as intended, the online particle monitor is maintenance-free.

10.3 Repair

Hengst offers a wide range of repair services for the online particle monitor.

 

▶

Have repair works at the online particle monitor only be carried out by the manu-
facturer or their authorized dealers and agencies. 

 

Содержание OPM II













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды