16.
17.
| Original User Manual | Item number 130-300-000 I Subject to change
| Original User Manual | Item number 130-300-000 I Subject to change
EN
EN
7. Start by using the handle to pull out the main filter until it can be grasped and place the filter into
the plastic bag immediately. Avoid vibrations while doing so. Seal the bag airtight right away. Next,
raise the prefilter, pull it out using the handle and place it into the plastic bag immediately. Avoid
vibrations while doing so. Seal the bag airtight.
8. Install the new filters in the correct position and the right order (follow the labeling on the filters).
Prefilter and main filter are installed at the bottom and the top, respectively. The handles point
towards the maintenance door, while the arrows on the filters point in flow control direction.
9. Slide in the prefilter all the way and insert it behind the metal rail. The main filter must be pushed
in all the way above the prefilter.
10. Close both locks of the tensioner. Verify that the filters are clamped tightly and that the seal of the
main filter abuts tightly at the top on the appliance housing.
11. Close the door of the appliance. Finish by locking all four locks on the maintenance door by rotating
them a quarter turn using the included key.
12. The HEPA H14 filter set is composed of materials that can be disposed of with the regular household
waste. However, please follow all applicable legal provisions and local regulations as well.
Notice:
Do not grasp the filter in the area of the pleats as these may easily become damaged to a
point where proper operation can no longer be guaranteed.
