USER’S MANUAL
20
After machine running for a period of time ,clean up the dust that may store up in the water
collector .when cleaning,take out out water collector from the back (diagram 4.1.2) .Clean and
replace back to original position. Attention: insert the water collector along its track until its
original position.
4.1.3. Cleaning of bottom tank
①
Soft press on the “
” icon until the machine enter stand by stage (diagram 4.1.3-1), unplug
the power cord;
②
Take out bottom tank (diagram 4.1.3-2);
③
Open tank cover (diagram 4.1.3-3), remove filter cup (diagram4.1.3-4);
④
Take out filter net and filter fibre (diagram4.1.3-5), rinse the cup filter with clean water
(diagram4.1.3-6);
⑤
Pull out the bottom tank level sensor PIN (diagram4.1.3-7), PIN disconnect UV light
connection pin (diagram4.1.3-8);
⑥
Disconnect the two tubes connecting to air pump (diagram 4.1.3-9), pull out outlet tube from
the bottom tank (diagram 4.1.3-10);
⑦
Unscrew UV light plastic bolts, (diagram 4.1.3-11), and take out UV light;
⑧
Remove bottom tank mash filter and rinse with clean water (diagram 4.1.3-12), if the mash
filter has been broken, replace with new one. Clean the bottom tank with clean cloth.
The above cleaning procedure recommend to use city water supply. Install back all part
after finish.
