Hendi Kitchen Line 222836, Руководство пользователя, Страница: 10 / 220

10
EN
Troubleshooting
If the machine does not function properly, please check the below table for the solution. If you are still una-
ble to solve the problem, please contact the supplier/service provider. DO NOT repair yourself.
Problems Possible causes Possible solution
Machine do not start run-
ning
Bowl guard (5) is not in properly closed
position.
Rotate the bowl guard (5) to the right
until fully closed properly.
Bowl (2) is not raised to the proper loca-
tion.
Raise the bowl (2) to the correct position
by using the level (9).
The power plug is not connected properly. Check to make sure the power plug is
connected properly.
Machine stops during op-
eration
Internal overload activates to prevent
overheat.
Press RED, “O” button (8), unplug the
machine, leave for cook down complete-
ly, press RESET button (10) at the back.
Damage or broken transmission belt Check with the supplier
Machine sound too noisy
Machine is not placed on a horizontal sur-
face.
Adjust the surface or move to another
horizontal surface.
Bowl (2) is not placed correctly.
Make sure the bowl (2) is placed into the
bowl cradle (12) correctly with the guid-
ed pins (3).
Attachments not fitted properly.
Remove and install the attachments
into position again.
Bowl is overloaded. Reduce ingredients capacity.
Damaged or worn transmission belt.
Check with the supplier.
Planetary gear needs lack of lubricant.
Attachments cannot install
onto the planetary shaft
easily
Lack of lubricant and / or cleaning of the
planetary shaft required.
Wipe planetary shaft with a clean damp
cloth and lubricate the shaft with miner-
al oil or grease.
Bowl lift / lower handle (9)
not operation easily
Lack of lubricant on the bowl slides.
Lubricate bowl slides with mineral oil
or grease.