Hendi 272411, Руководство пользователя, Страница: 5 / 76

5
EN
Exploded view
Assembly
Tools required: Philips head screwdriver
Note: Remove any transit protection material before
assembly.
Step 1: Place the base on a flat surface. Secure the
rear housing to the base using 5pcs M5*10
screws and washers.
Step 2: Secure The burner assembly outside of the
rear housing using 5pcs M5*10 screws and
washers.
ATTENTION: To close the door well, lift the burner
assembly by one hand to secure 5pcs M5*10 screws
and washers with the lowest position of screw holes
in burner assembly.
Step 3: Connecting hose & regulator to the burner
assembly.
Put gas cylinder on the base and connecting
regulator to a gas cylinder, then assembly 2
cylinder belts and ensure gas cylinder using
belts. (See “Connecting to a Gas Cylinder”
and “Securing a Gas Cylinder”)
Check leakage for all connections using
a soapy water solution. (See “Gas Leakage
Test”)
Step 4: Slide the housing door onto the hinge of rear
housing, close door and lock.
Step 5: Attach wheels set to the base with 2pcs
M6*12 screws and washers. (Ignore this step
in case wheels set is assembled).
Burner assembly
Hose & regulator
Housing door
Base
Rear housing
Wheels set
Belts for
gas cylinder