11
EN
4.7.2. GENERAL COMMENTS REGARDING Hendi DISHWASHERS 232712
• When the “TANK” indicator turns off, the dishwa-
sher is ready to wash.
• Before you insert the rack, make sure all the food
residues are removed.
• Add liquid detergent to the dispenser by hand un-
less the dishwasher is fitted with a detergent
dispenser. See if there is enough shine and rinse
agent and detergent in the inside tanks.
• When the washing program ends, the “PRO-
GRAM” indicator will come off. Open the door and
remove the rack with clean crockery.
• Leave to dry.
If there are any dirt stains or water marks after the
washing cycle, this may be due to:
• inappropriate amount of detergent,
• large mineral content of the rinse water,
• insufficient amount of shine and rinse agent,
• incorrect arrangement of the dishes in the rack,
• low water pressure during rinsing,
• low temperature of water during rinsing,
• clogging or improper fitting of the filters,
• dirty water in the tank and/or boiler.
4.8 Safety arrangements
There is a safety adjustment at the door, which in-
terrupts the appliance’s operation during washing,
if the door opens by mistake. There is thermal pro-
tection integrated in the pump motor winding with
automatic start-up, which interrupts power supply
to the pump, in case of overcharge.
There are thermal safety fuses, which interrupt the
power supply in case of boiler or dispenser overhe-
ating.
4.8.1 Further significant indications / Safety indications
No technical modifications are allowed in this ap-
pliance. The manufacturer is not responsible for any
possible damages resulting due to modifications.
The same applies in case that the appliance is used
for any other purpose except the one anticipated, in
case of fault or improper use.
The water inside the dishwasher is not potable.
Use, maintenance and repair of dishwasher should
be performed only by persons familiar with these
works and informed for any possible risks.
4.9 Daily works
• Turn off the operation switch
• Turn off the main switch / fuses.
• Turn off water supply faucet.
• Empty the dishwasher by removing the overflow
pipe “A” (overflow pipe) but leaving Pump filter
“B”.
