9
GB
Grounding installation
This appliance is classified as
protection class I
and must be
connected to a protective ground. Grounding reduces the risk
of electric shock by providing an escape wire for the electric
current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connec-
tions must be properly installed and grounded.
Main parts of the product
(Fig.1 on page 3)
1. Power switch (0 / I)
2. Speed dial (clockwise, Low to Hight)
3. Pulse button
4. Bottom of the motor base unit
5. Motor unit
6. Blade assembly
7. Jug set
8. Jug lid
9. Cover cap
10. Protective cover
Remark:
The content of this manual applies for all listed
items unless specified otherwise. The appearance may vary
from the shown illustrations.
Circuit diagram
(Fig.2 on page 3)
L1 & L2: Magnetic ring
MS1: Micro switch
MS2: Magnetic safety micro switch
PCB: Main PCB
S: Power switch
R: Variable resistor
P: Pulse button
M: Motor
Exploded diagram with part list
(Fig.3 on page 4)
Part no.
Part name
Quantity
1
Cap cover
1
2
Jug lid
1
3
Stamper (not supplied)
1
4
Protective cover (rear)
1
5
Jug set
1
6
Protective cover rubber sealing (rear)
1
7
Blade assembly
1
8
Seal ring of the blade assembly
1
9
Large seal ring
1
10
Mounting screw
1
11
Clutch
1
12
Jug holder
1
13
Jug holder support
1
14
Rubber seal cover
1
15
Motor outer housing
1
16
Safety micro switch assembly
1
17
Internal wire terminal for safety
micro switch
1
18
Mounting screws for the micro switch
2
19
Power plug
1
20
Power cord
1
21
Power cord clamp
1
22
Motor assembly
1
23
Cap cover
1
24
Jug lid
1
25
Stamper (not supplied)
1
26
Protective cover (rear)
1
27
Jug set
1
28
Protective cover rubber sealing (rear)
1
29
Blade assembly
1
30
Seal ring of the blade assembly
1
31
Large seal ring
1
32
Mounting screw
1
33
Clutch
1
34
Jug holder
1
35
Jug holder support
1
36
Rubber seal cover
1
37
Motor outer housing
1
38
Safety micro switch assembly
1
39
Internal wire terminal for safety
micro switch
1
40
Mounting screws for the micro switch
2
41
Power plug
1
42
Power cord
1
43
Power cord clamp
1
44
Motor assembly
1
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all acces-
sories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use
the device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resist-
ant surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.