Hendi 224847, Руководство пользователя

Страница: 5 / 40

5
EN
Before use
• Remove all protective packaging and wrapping.
• Check for the completeness of the product. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
• Clean the machine thoroughly with a dry cloth or
a soft brush (not included).
• After fixing the machine on a suitable surface, the
cleaning operation can be completed by passing
a piece of pasta through the rollers and the cut-
ters (to remove any dust). Then, throw away this
the pasta used for this operation.
• Never wash the machine body or the accessory
under running water or the accessory in a dish-
washer.
Operation (Making pasta sheet)
• Position the machine on a suitable surface which
can bear the appliance’s weight.
• Fit the container/ tray (not supplied) to the appli-
ance’s openings for placing the pasta sheet.
• After turning the knob to the position “7”, place
part of the prepared dough on the rollers.
• Press down the button to start operation & mak-
ing pasta sheet.
• Insert the dough gently and this will roll out the
pasta. Repeat this operation until a flat sheet of
pasta is obtained.
• To reduce the thickness of the pasta sheet, press
down the button again of the appliance. And turn
the knob to reduce the distance between the pas-
ta rollers.
• Pass the pasta sheet repeatedly through the roll-
ers until it is of the desired thickness.
Note: Please check with your recipe for making the
dough.
Operation (Cutting)
• Position the machine on a suitable surface which
can bear the weight, fit the supplied clamp into
the opening, tightening the screw until the ma-
chine is firmly locked to the surface.
• Fit the container/tray (not supplied) to the pasta
machine’s openings for placing the pasta.
• Press down the button to start operation & cut-
ting the pasta sheet.
• Fit the pasta sheet to the machine with your de-
sired cutting blade (tagliatelle or fettuccine).
Cleaning and maintenance
• Attention! Unplugged the appliance before clean-
ing.
• Do not remove residues of pasta using sharp
utensils. (Use soft brushes, not supplied).
• Never wash the appliance body or the accessory
under running water or the accessory in a dish-
washer.
• Never wash any part of the appliance or the ac-
cessory in a dishwasher.
• Clean the appliance thoroughly with a dry cloth
or a soft brush.
• Check that the parts are perfectly dry before put-
ting them away.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are still unable to solve the problem, please
contact the service provider/service provider.
Problem Possible cause Solution
The appliance does not start operation or stops
suddenly.
The appliance isn’t plugged in correctly. Plug in the appliance correctly.
The appliance isn’t switched on. Press the on/off button.