Hendi 209981, Руководство пользователя

Страница: 7 / 60

7
EN
5. How to use
For the first use, fill the kettle with water up to the
maximum water level, boils water and then pours
boiling water out, then clean the kettle with cool
water, repeat this operation for one or two times to
completely eliminate dust caused in production or
storage.
• Put the power base on an even place.
• Open the lid and fill the kettle with water .Do not
overfill! Use the water level lamp.
Caution: too much water may cause overflowing
boiling water. That’s dangerous!
• Close the lid and fit the kettle on power base.
• Insert the plug in ~220-24OV power source.
Caution: The appliance must be connected to a
power outlet whose current and frequency are
consistent with the data on the rating plate.
• Switch the machine to position “1”. The lamp
lighting up shows that the water is being boiled.
• Ten seconds after boiling, the kettle will automat-
ically shut itself off (with “0” downwards) and the
lamp will go off, you can also press “0” to shut off
power manually.
Attention: after automatic power off, make sure
not to press “1” with force. If required, restart
work till 30-60 seconds later.
Caution: never open the lid in operation. That’s
dangerous
• Lift the kettle from the base first for pouring wa-
ter.
• After use, the kettle may be left on the base; how
ever power must be shut off for safety.
6. Cleaning and maintenance
• Before cleaning, shut off power first, then lift the
kettle from base and cool it down, for safety, do
not pull out the plug with wet hand.
• Never disassembly the body or base by yourself.
• Do not soak the kettle or base in water. Do not
clean the kettle with high-corrosive or polishing
detergent.
• Clean the body and base with wet cloth, clean the
inside with water or some detergent if required.
• For best performance, check the filter regularly
if there is any furring, if any, flush it with water
or eliminate it with soft brush
(metal cleaner is
forbidden) .
• Please refer to relevant operation instructions for
furring removal.
7. Furring removal
• Add some citric acid (usually 2 spoons) in water
before boiling.
• Close the lid, fit the kettle on base and connect
the power.
• Press “1” to start boiling, when water begins to
boil, the kettle will automatically shut itself off. 30
minutes later, flush the kettle with clean water for
several times.
• If necessary, repeat the above steps for complete
cleaning.
8. Warranty
Any defect in the performance of the appliance that
becomes apparent within one year of its purchase
will be corrected by free repair or replacement, pro-
vided it has been used and maintained in accord-
ance with the instructions and has not been abused
or misused in any way. Your statutory rights are not affected. lf the appliance is under warranty, state
where and when it was bought, and include proof
of purchase (e.g. till receipt). In line with our policy
of continuous product development we reserve the
right to change product, packaging and documenta-
tion specifications without notice.