U.K. Customer Services Department
Telephone: 0191 377 1441 Facsimile: 0191 377 2972
E-mail: [email protected]
Durham Road, Bowburn, County Durham DH6 5NG, England. Telephone: 0191 377 0701 Facsimile: 0191 377 1309
www.pchenderson.com
P C Henderson (Ireland) Ltd
West Link Industrial Estate, Kylemore Road, Dublin 10, Ireland. Telephone: 01626 0444 Fax: 01626 0455
www.pchenderson.ie E-mail: [email protected]
Declaration of Incorporation
This Declaration of Incorporation has been prepared by the garage
door manufacturer to signify that the accompanying garage door
operator, if installed in accordance with the manufacturer’s detailed
instructions will meet the requirements of EN12453.
It is the responsibility of the installer to ensure that doors and garage
door operators are correctly matched prior to installation. It is also the
responsibility of the installer, legally described as the Responsible
Person, to ensure that a suitably nominated person will confirm that the
power operated door has been installed in accordance with the
instructions provided by both the door and drive unit manufacturer.
It is also the responsibility of the installing company to check after
installation that the power operated door and any safety devices
provided are suitable for the application and are all working
satisfactorily.This will permit the nominated person to attach a CE label
identifying the name of the installing company, a unique door reference
number and a date of completion. The installing company should label
the door and provide the documentation as specified within EN12635.
One copy of the Declaration of Conformity is to be issued to the client
and one copy is to be retained by the installing company, together with
the relevant two Declarations of Incorporation. In accordance with the
requirements of the Machinery Directive and the UK Supply of
Machinery (Safety) Regulations, these records are to be retained on file
for a period of ten years.
Note.
Duplicated printed pads set out in the format of Declarations of
Conformity in order to allow on site completion are available at a
reasonable cost from the DSMA for both members and non-members.
Alternatively, for an additional cost, a technical records file with full
details of requirements and procedures for compliance, and including
the necessary filing divisions, is also available.
SUPPLY OF MACHINERY (SAFETY) REGULATIONS 1992
E.C. DECLARATION OF INCORPORATION
GARAGE DOORS FOR POWERED OPERATION
GARAGE DOORS • SLIDING AND FOLDING DOOR HARDWARE
COMPOSITE ENTRANCE DOORS
P.C. HENDERSON LIMITED, DURHAM ROAD, BOWBURN, DURHAM DH6 5NG.
March 2007
Issue 1 (Insulated Roller Garage Doors)
This declaration is made by:
(V. Brockley, Managing Director)