manualshive.com logo in svg

Hemisphere GPS eDriveTC, Руководство пользователя

Поделиться
Скачать
Hemisphere GPS eDriveTC Скачать руководство пользователя страница 58

  eDriveTC User Guide

49

8.

What Max Turn Rate and Steering Speed should I set for my track 
tractor?

Follow the recommended settings provided in the hydraulic 
installation manual for your specific vehicle. Use the Steering 
Speed value to adjust how fast the vehicle reacts to steering 
commands. Only use the Max Turn Rate to prevent the tractor from 
making large overshooting steering corrections when acquiring the 
line or reacting to disturbances. Adjust the values by 5 points at a 
time to get close to the desired performance then begin adjusting 
by finer increments to optimize the system.

9.

Should the vehicle steering wheel turn when eDriveTC is 
operating?

No, under normal field operation the vehicle steering wheel should 
not turn when eDriveTC is steering. When performing the steering 
adjust function the steering wheel may begin to turn if eDriveTC 
after the steering cylinders have reached the end of their stroke. If 
the vehicle steering wheel is turning as the machine is auto-
steering through the field then you need to make sure that you 
have a counterbalance valve properly installed.

10. Will the eDriveTC engage in reverse?

Yes, but the steering commands will be in the opposite direction 
and the machine will not steer correctly onto the line.

11. I opened the hydraulic flow control all of the way and the steering 

cycle time does not decrease.

There could be too much resistance on the steering wheels for the 
eDriveTC to completely steer left and right. Perform the steering 
adjust function with the vehicle rolling slowly to check the cycle 
time.

Содержание eDriveTC



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды