A325 GNSS Smart Antenna User Guide
4
PN 875-0318-000 Rev D2
Chapter 1: Introducing the A325 Smart Antenna
becomes unusable, the next mode will be selected (for example, L-band DGPS, or Beacon or External
RTCM). Finally, if no correction signals are available, the device defaults to Autonomous.
You can include or exclude specific sources. For example, you can exclude sources that you do not
want your device to use, such as if you want to use only beacon. If you do not exclude the other
sources your device may use SBAS instead. Another example is if you want to exclude L-band (when
you do not have an L-band subscription) to conserve power. You include and exclude sources using
the
$JDIFFX,INCLUDE and $JDIFFX,EXCLUDE commands, respectively.
Refer to the Hemisphere GNSS Technical Reference (go to
www.hgnss.com
and click the GPS
Reference icon) for information on $JAPP, $JDIFF,INCLUDE,
$JDIFF,EXCLUDE, and other commands you can use with your device.
Parts List
Table 1-1 provides a description, quantity, and part number for each part in your kit.
Table 1-1: A325 parts list
Part
Qty
Part Number
A325 GNSS Smart Antenna
1
804-0104-000
Mounting adapter (part of kit part no. 710-0111-000#)
1
676-0016-000#
Mounting adapter, low profile
1
676-0024-000#
Note: Your kit will include one of the above mounting
adapters, depending on your order.
Magnetic mount
Note: Your kit may not include a magnetic mount.
1
720-0033-00A
The following accessory items are available for purchase separately for your A325.
Power/data cable (single DB9), 3 m
1
051-0129-002
Power/data cable (unterminated), 4.6 m
1
051-0169-000
Radio cable, 2 m
1
051-0313-000
Product Support
If you have questions regarding the setup, configuration, or operation of the A325, contact your
local dealer. For additional support information see “Technical Support” on page ii (just before the
Contents page).
