Hemisphere GPS A222, Руководство пользователя

Страница: 12 / 29

A222 User Guide Chapter 2-Installation Page 8 of 20
To surface-mount A222:
1. Determine the desired location for A222 (see Selecting the Proper Antenna Location ).
2. Refer to the template of the bottom portion of the A222 surface-mount (provided with A222 accessories). Use
the outer four holes per your installation.
3. Mark the mounting hole centers on the mounting surface.
4. Place A222 surface mount over the marks to ensure the planned hole centers align with the true hole centers
(adjusting as necessary).
5. Use a center punch to mark the hole centers.
6. Drill the mounting holes with a 5mm bit appropriate for the surface.
7. Use four machine screws (no. 8-32) to attach A222 to the surface mount adapter before securing the
complete unit to the intended area.
8. Place A222 surface mount over the mounting holes and insert the mounting screws through the bottom of the
mounting surface into A222 surface mount adapter.
Figure 2-3: A222 Antenna with Surface Mount Accessory
Hand-tighten only (10 to 12 in-lbs). Damage resulting from over-tightening is not covered by the warranty.