Clamping: air is drawn out of the chamber between the spring diaphragms. The
diaphragms relax and reduce the clamping sleeve’s diameter. The clamping sleeve is
pressed against the round rod. In this way, longitudinal movements can be stopped and
held, rotating movements may only be held on systems that are at a standstill.
3. Model variants
The PClamp N, ISO, E components are available in different sizes. The sizes are derived from
the sizes of standard ISO/VDMA cylinders. Cylinders and the PClamp N, ISO components
possess identical footprints. The model variants differ in the following aspects:
number of clamping modules; depending on the type, up to four modules are possible
different clamping diameters, depending on the application
different base and cover plates, depending on the application
number and size of air connections
the operating pressure is generally 4 or 6 bars, other pressures are optionally available
on inquiry
Rod scraper, optional
optional without preparations for inductive proximity switch
housing material used
the PClamp N, ISO, E components are also possible in customised special sizes and with
other operating pressures
Close
A1 = 0
p
PClamp N, one clamping modul
two clamping modules
three clamping modules
four clamping modules
PClamp ISO
PClamp E
Operating instructions
EN
5
PClamp_EN_2020_22012020 23.01.2020 15:39 Seite 5
