LIDO Series
Waterproof 2-Way Wall-Mount Speakers
9
The installer is responsible of installation. Please pay attention to
install speakers according to local safety regulations.
y
Use the bracket as a template to choose the holes position, and mark them on
the wall. Holes diameter is 5mm.
Ø5mm
y
Then use the appropriate hardware and tools (not supplied) tp properly fix the
bracket to the wall.
y
Place the speakers to the bracket using the supplied screws and washers ac
-
cording to the speaker.
y
Fit two screws into the mounting slot of the speaker’s back (parallel to the col
-
umn to help fit the screws).
When placing speakers horizontally, be careful not to touch and load
the front of the speaker net with hard facing, otherwise it will deform
the front net.
y
According to the installation plan and the adjustable range shown before,
choose the most appropriate height, pan and tilt, and then tighten the screws.
4.2. Speaker Connection
y
Connect the speaker to the 70/100V or low-impedance line. Pay attention to
polarity. Adjust power knob according to requirement (see section “3.2. Powers”
y
The speaker termination is red on one side (+), and black on the other side (-).
Connect the red side of the amplifier to the red speaker termination (+). Con
-
nect the black side of the amplifier to the black speaker termination (-).
y
In case of parallel speaker connection, please make sure that there is not in-