3
IMPORTANT
CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLING
THE UNIT AND MAKE SURE THAT THE YELLOW/GREEN GROUNDING
CONDUCTOR IS DIRECTLY CONNECTED TO THE GROUND IN THE WELDING
LOCATION.
THE UNIT MUST NEVER BE OPERATED WITHOUT PANELS AS THIS COULD BE
DANGEROUS FOR THE OPERATOR AND COULD CAUSE SERIOUS DAMAGE
TO THE EQUIPMENT.
THE UNIT WORKS ONLY WITH INPUT VOLTAGE OF 230Vac -50 Hz-1Ph.
ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE WELDER FROM
THE POWER SOURCE BEFORE SERVICING THE UNIT.
THIS WELDER CAN BE USED ONLY WITH DIESEL GENERATING
SETS WITH POWER HIGHER THAN 11 KVA AT 230 V 50 HZ.