HELVAR Digidim 458, Руководство по установке, Страница: 8 / 10

Digidim 458 Dimmer Installation Guide Helvar Ltd.
Doc. No. 7860186 Page 7 Issue 1 (10/7/2008)
Step 6 Set SDIM Addresses
If the dimmer is connected to a system through its SDIM connection terminal, the
SDIM addresses must be set as follows:
Display Procedure
Upon power up of the unit, the LCD
‘Display Screen’ appears. Access Addresses Menu
From the Control Panel of the dimmer module:
1) Press on the keypad to access ‘Main Menu’.
2) In ‘Main Menu’, with the arrow pointing at
‘Addresses’, press .
The ‘Addresses’ menu appears, listing
the addresses for S-DIM and DALI. Set SDIM base address
1) At ‘Set SDIM base’, press .
2) Press or to select a base address
and press to enter.
3) Press to return to ‘Addresses’ menu.
Note: The base address is the first channel address,
from which the remaining addresses follow
consecutively (unless changed manually in the ‘SDIM
address’ sub-menu, see procedure below).
Set SDIM addresses (optional)
If you wish to set the addresses individually:
1) Press ‘down’ to select ‘SDIM addresses’ and press
.
2) Press or to select a channel and
press to enter.
3) Press or to select an address and
press to enter.
4) Press and hold to return to ‘Main Menu’.
The S-DIM addresses are now set and the unit is operational.
- ADDRESSES -
Set SDIM base
SDIM address
- ADDRESSES -
Set SDIM base
SDIM address
- MAIN MENU -
Addresses
About product
12345678
Dimmer