Helpmation JP-C1H, Руководство пользователя

Страница: 40 / 43

11
GENERAL MAINTENANCE
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER SUPPLY BEFORE
ANY MAINTENANCE IS STARTED.
WATER FILTER: Inspect the water filter before filling with water. Clean water
filter if dirty.
NOZZLE CLOGGED:
A clogged nozzle will cause the operating pressure to be too
high causing the portable washer to surge. If this happens turn unit off and unplug pressure washer:
•
Unplug power supply, pull trigger on spray nozzle handle to relieve pressure, remove nozzle from hose.
• Clean the spray nozzle with the nozzle cleaning tool.( See Diagrams 1&2 below).
• Flush wand assembly backwards with water or compressed air.
•
If pressure is still too high, repeat steps 1-2.
LUBRICATION : No lubrication is required for this pump. Silicone grease may
be added to hose connector o-rings if connecting becomes difficult.
Add some silicone grease to the metal part of the spray nozzle after long time no use.
WARNING: HIGH PRESSURE HOSE, DAMAGED HIGH PRESSURE HOSES CAN
BURST AND CAN CAUSE A POTENTIALLY HAZARDOUS SITUATION OR INJURY. HIGH PRESSURE HOSE S SHOULD
NOT BE KINKED, CRUSHED, TWISTED, OR DAMAGED IN ANY WAY. REPLACE THE HIGH PRESSURE HOSE
SHOULD THIS OCCUR.
TO CLEAN SPRAY NOZZLE REPLACE FUSE
STEP 1: STEP 2:
Unscrew end of power cord
Pull back quick disconnect Clean the nozzle with the tool. adaptor to remove old fuse.
and detach the nozzle from Remove any dirt from the nozzle. Discard and replace with
the hose. and rinse new fuse.