8
Then the heater is transferred to full power for the desired period. If a sensor element (OLET 9-2)
obtainable as an accessory has been installed in the sauna space, the remaining sauna use time
and the sauna room temperature are alternatively shown in the lower display. The upper display
shows the temperature of the stone space.
Distinguishing the full power
The heater is automatically transferred to simmering mode once the sauna use period has expired.
If use of the sauna is to be interrupted before the sauna use time has expired, it can be done by
pressing the OK button and by pressing and holding the button down for about 3 seconds. Then
the heater is transferred back to the simmering mode and the stone space temperature is lowered
until reaching the set simmering mode temperature.
The lid of the heater can be closed immediately when the heater is transferred to the simmering
mode i.e. there is no need to wait for the cooling of the stones.
= =
Alteration of the sauna use period and sauna room temperature
in the lower display when the sensor element OLET 9-2 (accessory)
is installed in the sauna room.
=
=
OK
Heater in full Press the OK Heater goes to
power mode button and hold simmering mode.
it down for appr.
3 seconds.
