PROFINET switch 4/8/16-port | Version 1 | 20.02.2020
8
1.4
Intended use
The PROFINET switch (referred to as “the device” in the following) can be used for the networking of
Ethernet networks with the PROFINET protocol .
All components are supplied with a factory hardware and software configuration. The user must carry
out the hardware and software configuration for the conditions of use. Modifications to hardware or
software configurations that extend beyond the documented options are not permitted and nullify
the liability of Helmholz GmbH & Co. KG.
The device may not be used as the only means for preventing hazardous situations on machinery and
systems.
Successful and safe operation of the device requires proper transport, storage, setup, assembly,
installation, commissioning, operation, and maintenance.
The ambient conditions indicated in the technical specifications must be adhered to.
The device has a protection rating of IP 20 and must be installed in an electrical operating room or a
control box/cabinet in order to protect it against environmental influences. To prevent unauthorized
access, the doors of control boxes/cabinets must be closed and possibly locked during operation.
1.5
Improper use
The consequences of improper use may include personal injury to the user or third parties, as well as
property damage to the control system, the product, or the environment. Use the device only as
intended!
