6
2. At the selected wake up time the alarm will beep and continue for about two hours and then
shut off automatically.
3. If you want to listen to the radio after the wake up time, set the FUNCTION SELECTOR to the
“AUTO” position. Adjust the tuning and volume for the radio program if required.
4. To stop the beep, press the ALARM Button once. The beep will stop but the alarm remains
set and will turn on the alarm on again at the same time the following day.
5. If you do not want the alarm to turn on the following day, set the FUNCTION SELECTOR to
the “OFF” position. The AUTO INDICATOR will go off.
WAKE TO RADIO
1. Slide the FUNCTION SELECTOR to “ON”, select the band, station and adjust the volume to a
level that you wish to hear when the wake up time is reached, then slide the FUNCTION
SELECTOR to the “AUTO” position. The AUTO INDICATOR will light on the display.
2. Reconfirm the wake up time setting by pressing the ALARM BUTTON.
3. At the selected wake up time the radio will turn 'On' and will play for about two hours and then
shut off automatically.
4. To stop the radio before it shuts off, press the ALARM BUTTON. The radio will stop but the
alarm remains set and will turn the radio on again at the same time on the following day.
5. If you do not want the radio to turn on the following day, set the FUNCTION SELECTOR to
the “OFF” position. The AUTO INDICATOR will go off.
SNOOZE ALARM
After the radio or beeping sounds, you may press the SNOOZE button for a few more minutes
sleep. The alarm will stop for approximately 9 minutes and then turn on again.
SLEEP OPERATION
SLEEP TO RADIO
You can program the sleep timer to play the radio for up to 1 hour 59 minutes and then shut off
automatically.
1.
Slide the FUNCTION SELECTOR to “ON”, select the band, station, and volume level that you
want to listen then slide the FUNCTION SELECTOR to either the “OFF” or “AUTO” position.
2.
Press the Sleep Button, the display will show 0:59 sleep time. At the same time radio will
come on and stay on for 59 minutes.
3.
To shorten the ‘SLEEP’ time to less than “0:59”, press the Sleep Button together with the
Minute Button until the desired “SLEEP” time is shown on display.
4.
To set at the maximum sleep time of 1:59, press the Sleep Button. The display will show
“0:59” sleep time and the radio will begin to play. While holding the SLEEP button, press the
HOUR button. The display will show “1:59” sleep time. After 1 hour 59 minutes, the radio will
shut off automatically.
5.
To set the Sleep Timer between “0:59” and “1:59”, first press the Sleep Button together with
the HOUR button, the display will show “1:59” Sleep time. Then, press the Sleep Button
together with the Minute Button until the desired “SLEEP” time is shown on display.
6.
After the preset “SLEEP” time has elapsed, the radio will switch off automatically. To switch
the radio off before the preset “SLEEP” time has elapsed, press the SNOOZE BUTTON.
SLEEP AND WAKE TO RADIO
1. Slide the FUNCTION SELECTOR to “ON” and select the band, station and volume level that
you wish to hear when the alarm comes 'On', then slide the FUNCTION SELECTOR to the
“AUTO” position. The AUTO INDICATOR will light up.
2. Follow steps 2 to 5 in “SLEEP TO RADIO” section above to set your desired sleep time.
3. The unit is now programmed to turn off automatically at the Sleep Time you selected and
then to turn on at the preset “Alarm Time”.
4. To cancel the sleep timer before it counts down to "00" and shut the radio off, press the
SNOOZE BUTTON.
Содержание KT2051
Страница 8: ......
