6
USING THE CHARGER
The charger should be examined regularly for damage to the cord, plug, enclosure
and other parts. In the event such damage has occurred, the scooter should not be
charged until the charger has been repaired by qualified personnel or replaced.
Use only the supplied, recommended charger.
• Always use caution when charging.
• The charger is not a toy and should be operated by an adult.
• Never operate the charger near flammable materials or liquids, and operate the
charger in well-ventilated areas.
• Disconnect the charger and unplug it from the scooter when not in use.
• Do not exceed the recommended charging time.
• Always disconnect the charger from the scooter prior to wiping down or cleaning
the scooter with any liquid.
FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF
POTENTIALLY SERIOUS INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING
AND ALWAYS WEAR PROTECTIVE GEAR.
BEFORE YOU BEGIN ASSEMBLY
WARNING
Remove all packing and items from the display box. Make sure that the power switch
is turned “OFF” before assembling the scooter.
ESTIMATED ASSEMBLY TIME
You should allow approximately 20 minutes for assembly, not including initial
charging time. Initial charging can take approximately 18 hours.
(see page 11 for
charging information)
Remove contents from box. Remove all the separators that protect the components
from damage during shipping. Inspect the contents of the box for scratches in the
paint, dents or kinked cables that may have occurred during shipping.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY
MAINTENANCE PROCEDURES.
Assembly by adult with mechanical experience is strongly recommended.
WARNING:
DO NOT USE NON-ORIGINAL OR
NON-RECOMMENDED PRODUCTS WITH YOUR
ELECTRIC SCOOTER.
Altering of the original components or the use of non-recommended
replacement parts may or may not be compatible with the design and will
void the warranty and may cause an unsafe condition resulting in serious
injury or death.
