NOTE: The “Chilled Water” mentioned above is about 15°C below the Normal Tap Water.
Filter life:
The life of your filter will be affected by the quality of your tap water. When you
notice that the water begins to flow very slowly from the spout it is time to
change the filter. This can be any time from one month to three months
depending on the area where you live.
However, it must be replaced at least every three
months. The Date Indicator
for Filter Replacement on the filter will help you to remember when this is.
Replacing the filter:
1. Removing the old filter:
•
Switch off and unplug the appliance.
•
Ensure the top tank is empty
•
Remove and discard the old filter.
•
If O-ring seal remains inside the appliance remove and discard it.
2. Installing the new filter:
•
Wet the new O-ring seals located at the middle of the filter and fit the filter into place.
•
Fill the water tank and plug the appliance into the power outlet.
•
Flush the filter as explained above.
If the appliance has not been used for more than two weeks, flush the filter before use.
Emptying the internal tank
•
Switch off the unit and unplug from the mains supply.
•
Turn the unit upside down to reveal a drain plug located in the centre of the base.
•
Remove the spring clip securing the silicone cap to the drain and remove the silicone cap.
•
Drain the unit.
•
Refit the silicone cap and spring clip.
CARE & MAINTENANCE
•
Do not use harsh detergents or abrasive cleaners.
•
Do not place any part of this appliance in the dishwasher.
•
Wipe the base with a clean cloth or paper towel.
•
Wash the water tank in warm soapy water using a mild detergent.
•
Do not immerse the base in water or any other liquid.
•
If the unit is to be moved or if it is to be stored for a prolonged period without being used, it is
recommended to drain the internal tank of any remaining water.
