Ensure that the heater has been allowed to cool before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
Do not allow any water or other liquid to enter the housing or control panel.
Ensure the heater is dry before plugging back into the mains supply.
CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the heater.
Warning: In order to avoid overheating, do not cover the heater.
WARNING - Fabric, clothing or other flammable materials may ignite if placed against or in close
proximity to the heater. No flammable materials should be placed within 120cm of the front or
heat outlet and 50cm of sides or rear of the heater. Do not cover the heater. This appliance is for
indoor use only. Do not use outdoors.
STORING THE HEATER
When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean dry place.
SPECIFICATIONS
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North, Victoria, 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
Model
Description
Voltage
Frequency
Wattage
PCH2000T
PANEL CONVECTION HEATER 2000W
240V~
50Hz
2000W
PCH2400
PANEL CONVECTION HEATER 2400W
240V~
50Hz
2400W
