Avoid touching the heater body whilst the heater is on. Do not move the appliance while it is
functioning in order to avoid overheating with the additional risk of fire.
Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
Do not use the appliance for other than its intended use.
Do not leave the appliance unattended when switched on.
Always use the heater on a leveled surface.
Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of
overheating).
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children.
Always use a fireguard when children and infirm persons can come into contact with the heater.
Never sit or stand on the heater.
When the heater is not in use, store in a cool dry location.
Do not store until the heater cools down (allow the unit to cool down for at least 15-30 minutes).
Do not use this heater in the immediate below or in front of a power outlet.
In order to avoid overheating, do not cover the heater.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
BEFORE FIRST USE
Remove all packaging and check the appliance for any damages during transportation. If the unit
appears to be any damages, please take back the damaged heater to the place of purchase for a
replacement.
Ensure a power socket is available to power the heater and that the heater is not directly located
under the power socket.
Ensure the heater is placed on a level surface with enough clearance from its surroundings.
CAUTION:
Some parts of this product can become very hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
This heater is to be operated only in an upright position. The heater incorporates a pendulum type
tilt switch inbuilt in the heater body. If the heater is tilted or knocked over, the power will cut off
automatically. To start, put back the heater to the upright position and the heater will start working.