operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See
your electrician for professional advice.
•
This appliance contains no user serviceable parts. Any maintenance other than cleaning should be
performed by a qualified person.
•
Do not immerse unit, power plug or power cord in water, or any other liquid.
•
Never operate any appliance with a damaged power cord or plug, should the appliance malfunction, or if
it has been damaged in any manner.
•
Do not leave the appliance unattended whilst it is on.
•
Before cleaning, always turn the appliance off, switch off at the power outlet, and unplug at the power
outlet. Allow the appliance to cool completely before undertaking any cleaning.
•
Do not allow cold water to sit in the urn for more than 2 days, as it could stagnate, which is very
unhygienic. Empty the water out and refill the urn if water has been sitting in the urn for more than 2
days.
POWER SUPPLY
•
If the unit uses a mains power supply, ensure that the plug is securely inserted into the mains socket and
it is easily accessible.
•
Protect the power lead from sharp objects, excessive heat and damp or wet locations.
•
Check the power lead periodically, and replace if damaged.
•
Check that the voltage on the rating plate of your product corresponds with your local electricity supply
which must be A.C. (Alternating Current).
•
Any repairs should only be carried out by a fully qualified electrician or an authorised service agent.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
FEATURES
DO NOT POSITION THE URN SO THAT THE TAP HANGS OVER THE COUNTER EDGE. IT IS NOT
DESIGNED TO BE USED THIS WAY AND COULD LEAD TO SERIOUS SCALDS SHOULD THE TAP BE
SWITCHED ON BY MISTAKE.
1.
Lid knob
2.
Lid
3.
Cool touch handles
4.
MAX fill line
5.
Water gauge
6.
On/Off switch
7.
Reset button
8.
Hot indicator light
9.
Heating indicator light
10.
Tap