INSTRUCTIONS
1.
Read instructions for use and follow them carefully.
2.
Before using the blender for the first time, wash every component except the motor base in
warm soapy water. Rinse and dry thoroughly. Using a damp cloth or sponge, wipe the motor
base, making sure you only use a mild detergent solution.
3.
Find a dry, suitable, level surface near an electrical outlet and assemble your blender. Make
sure the unit is away from any potential heat source (cooking hobs, oven, etc). Ensure the
mains lead does not hang over the edge of the work surface.
4.
Assemble the blender with the desired attachment.
5.
Fill your measuring cup with the desired ingredients, ensuring you do not exceed the max
800/1000ml marking on the short/tall cup.
USING YOUR MULTI BLENDER – BLADES WITH CUPS
•
Add the ingredients to the Short Cup or Tall Cup.
•
Fit the desired blending blade (Flat Blade/Cross Blade) onto the selected container and twist
until tightly sealed.
•
Align the tabs on the selected container with the slots on the Motor base, as shown opposite.
•
Press down (1) onto the Motor base to turn the motor base on.
•
To stop the blade, simply release pressure on the container.
•
For continuous blending press down onto the Motor base and turn slightly clockwise (2) until
the tabs lock under the lips of the Motor base.
•
To turn it off, twist the Cup anti clockwise and release pressure.
WARNING!
The blades are very sharp, take extreme caution when washing the blades.
Do not immerse the motor base, cord and plug in water or any other liquid.
Make sure the appliance is switched off and unplugged before cleaning.
CAUTION!
•
Do not use harsh abrasive chemicals or oven cleaners.
•
If the blade stops during continuous blending, a hard ingredient may be stuck in the blade.
Unplug the Blender, take the blade/cup assembly off the motor base and shake the ingredient
to unblock the blade.
