HELLER HAP120, Инструкция по эксплуатации

Страница: 9 / 11

PLEASE NOTE: Ensure carbon filter faces out when installing the filter system into the unit.
Checking & Maintaining the Filter:
Maintain the filter by checking it frequently. Depending on air quality conditions and usage, you may need
to replace it more frequently.
Vacuum the carbon filter layer as needed to remove loose debris and dust to help prolong the life of your
HEPA filter (refer to “Air Cleaning Layers” on page 5).
To check the status of the HEPA filter, peel back the carbon layer to expose the pleated HEPA Filter. If the
HEPA Filter is no longer white and is covered in grey dust/ dirt it should be replaced.
IMPORTANT: Do not try to wash and re-use the Combination Filter.
Installing & Removing the UV-C Bulb:
UV Bulb Replacement Indicator - the UV light on the display will flash when it is time to replace the UV bulb.
WARNING!: UV radiation is dangerous for the eyes and skin. Do not operate the UV-C
emitter (UV-C light bulb) outside the appliance. Please read the Instructions carefully.
NOTE: The appliance must be disconnected from the supply before changing the UV-C
light bulb (UV-C emitter).