BEFORE FIRST USE
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.
Install the Glass Door
1.
If the glass door is not attached when unpacked, hold the door handle with one hand. Refer to
fig 1.
2.
Place the LEFT door hinge into positon at the LEFT corner of the Oven chamber.
3.
Position the RIGHT hinge into place on the RIGHT corner of the Oven chamber.
4.
Slide the locking hinge to the right to secure the door into position. Refer to fig 2.
Install the Dual Heat Shields
The heat shields protect the exterior from high heat and help maintain super-fast rotisserie cooking of
foods on the interior. Install the heat shields as follows:
1.
Hold one heat shield at the top (identified by finger holds at each end). Refer to fig 3.
2.
The black side of the shield should be facing inward toward the rotisserie.
3.
Slide the heat shield down into the inside of the outer wall until fully secured on the bottom of
the Oven chamber. Repeat with the outer shield.
Install the Crumb & Drip Tray
Grasp the handle of the Tray; guide the Tray into the slot at the bottom of the Oven chamber and lift
straight up and out. Repeat with the other shield. Refer to fig 4.