TIMER FUNCTION:
The timer function can be used in any mode. The timer allows you to set the length of time from 0-8 hours.
To use the timer, press the timer button on the control panel. Each press of the button increases the timer
by one hour, for example pressing the timer button three times, will set the timer for 3 hours. The amount
of time set will be displayed on the unit.
OVERHEAT PROTECTION:
This heater is fitted with a safety overheat protection device. Should the unit overheat due to total or partial
obstruction of the grille, the appliance will automatically turn ‘Off’. If overheating occurs, ensure the
appliance is switched ‘Off’ and turn off the power supply. Unplug the appliance and let it cool for 30
minutes. If something is obstructing the grille, ensure the object is removed. After 30 minutes has passed,
turn the heater on again as described above.
Remote Control Instructions
ON/OFF
1.
Turn the heater ‘On’ by pressing the button on the remote control. The unit will display the
current room temperature and will automatically operate in ‘Fan’ mode.
2.
Press the button again to turn the heater ‘Off’.
MODE
1.
Press the mode button once for Low heat setting (1000W)
2.
Press the mode button twice for high heat setting (2000W).
TIMER
The timer function can be used in any mode. The timer allows you to set the length of time from 0-8 hours.
To use the timer, press the timer button on the control panel. Each press of the button increases the timer
by 1 hour, for example pressing the timer button 3 times, will set the timer for 3 hours. The amount of time
set will be displayed on the unit.
+ AND –
Adjust the set temperature by pressing the ‘+’ and ‘-’ buttons. When the unit is first turned on, the
temperature will start at 25°C (then change according to last temperature setting). The temperature range
is between 10-49°C and each press of the ‘+’ and ‘-’ buttons will increase/decrease the temperature by 1°C.
When pressing the ‘+’ and ‘-’ buttons the LED display will change from the current room temperature to the
set temperature. Once you have stopped pressing the temperature buttons, the room temperature will
display again.
During operation; use the ‘+’ and ‘-’ buttons to control the set temperature. When the room temperature
rises above the set temperature, the unit will stop heating. When the room temperature drops 3°C lower
than the set temperature, the unit will start working again.
Note: The temperature can only be adjusted by using the remote control.
WARNING: Do not touch the machine while it is on and ensure the wind outlet/inlet is never covered.
