Hella KLED-FO, Инструкция по монтажу

Страница: 27 / 40

27
Technical data
Operating voltage range: 10–32V
Mean power draw
yellow/red: 12V: 1,5A | 24V: 0,8A
Mean power draw
blue/green: 12V: 2A | 24V:1A
Flash sequence: Simple, double,
triple, quadruple flash
Temperature range: -40°C to +60°C
Plus line with fuse: 10A slow-blow
Reverse voltage protection: Yes
Light hood: PC
Assembly
Hella rotating signal lamps (K-LED
Art.-No. 2XD 010 311-001, …-011,
…-021) have been officially type-
tested within the scope of ECE-R65.
They need to be mounted at the
highest point of the vehicle and, when
the vehicle is loaded during operation,
they must be vertical to the road
surface. All rotating signal lamps are
RFI suppressed and comply with VDE
> 0,6 mm
r > 3000 mm
Approval
Select the right position on the roof
of the vehicle (see specifications). If the
defined visibility (see Road Traffic
Licensing Regulations- StVZO) cannot
be satisfied due to structures on the
roof of the vehicle, further
signal lamps must be mounted.
M4 screws need to be used to attach
them from below.
Electrical connection
(Plus line with fuse)
Use a cable diameter of
min. 1.5 mm
2
, 10 A slow-blow fuse
0879 Part 2. They are EC-approved
according to RL72/245 EWG in the
version 2006/28 EC
Casing: AL DG
Protection class: IP 5K, 4K, 9K
RFI suppression:
e1 Approval according to 72/245 EWG in
the version 2006/28 EC.
A