Hella KLED-FO, Инструкция по монтажу, Страница: 10 / 40

10
We recommend
programming the lamp
BEFORE mounting
it to the roof.
1
2
3
4
5
6
7
8
9
250 ms
500 ms
1. The lamp must be activated (white
to plus + , brown to minus – ).
2. The "synchronisation" input (green)
is connected to plus +.
3. After approx. 2 seconds the flash
sequence selection mode is activated;
the lamp now starts to flash with
approx. 1 Hz. After every flash cycle,
the next flash sequence is activated,
although it always starts with the first
The programming mode allows the
user to select one of the nine available
flash sequences. Only the flash
sequences 1 and 2 are approved
for use in Europe.
flash sequence. If you want to select
the 4th flash sequence, the input
"Select flash sequence" (green) needs
to be disconnected from plus + after
the 4th flash.
Flash sequence options:
1. Simple flashing
2. Double flashing
3. Triple flashing
4. Quadruple flashing
5. Simple flashing
(250ms offset to flash sequence 1 )
6. Double flashing
(250ms offset to flash sequence 2)
7. Triple flashing
(250ms offset to flash sequence 2)
8. Quadruple flashing
(250ms offset to flash sequence 2)
9.Simple flashing, 1 Hz
Setting
the flash sequences
Possible
flash sequences
750 ms 1 s
ECE
2XD 010 311-201
2XD 010 311-001
2XD 010 311-101
2XD 010 311-201
2XD 010 311-001
2XD 010 311-101