Helix Main Board
Assembly and Setup Manual
30
Comments, Questions or Concerns contact the developer at:
Custom Cable Pin-outs
The Helix can control other DIY controllers and DMX controllers; however, most will require custom Cat5 cables. This
section shows the pin-outs of these custom cables. Connect only the pins shown, leave all of the other pins open.
RPM’s DMX SSRs will operate using standard Cat5 patch cords.
The Renard series of controllers require a cable with the pin out shown in Figure 1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Helix Channel Bank
Renard Input
Figure 1
Helix to Renard Pin-out
LOR controllers require a cable with the pin out shown in Figure 2
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Helix Channel Bank
LOR Input
Figure 2
Helix to LOR Pin-out
DMX controllers with standard DMX RJ45 wiring require a cable with the pin out shown in Figure 3
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Helix Channel Bank
DMX Input
Figure 3
Helix to DMX Pin-out