Helipal storm SRD101, Руководство пользователя

Страница: 18 / 21

18 Copyright@2016 HeliPal.com. All Rights Reserved
Spektrum DX8 MD2 (Gen 2) Transmitter Parameters
Please make sure your Spektrum DX8 MD2 (Gen 2) transmitter have the following parameters.
1) Press and Hold the roller while turn on transmitter,
goto [Model select] and add a new model for the
drone, rename it as you like. (e.g. Storm)
2) In [Model Type] , choose Plane
3) Goto [Channel Assign] , make GEAR : Gear and
AUX1 : AUX1 4) Same page, lower right corner, goto NEXT page
5) In the [Channel Input Config] page, make Gear : G
switch and Aux 1 : B switch
6) Press Back button on transmitter panel until you exit
system menu. goto [Servo Setup] page
7) In [Travel] menu, make sure you have those six
channels ( THR, AIL, ELE, RUD, GER and AX1 ) to
have 147 for travel like this picture, otherwise the
drone will not start.
6) Goto [Reverse] menu, make sure AIL , RUD , GER and
AX1 channel are reversed.